1
/
of
1
HIRA
Manual Core Cutting Machine
Manual Core Cutting Machine
Manuel Core Cutting Machine is mainly used to cut rock, concrete and core specimens of various sizes and to obtain two half cylinders from core specimens.
Cutting Height is 105 mm for HR-M1250 Model and 95 mm for HR-M1300. Cutting Length for both models is 1200 mm.
The Manuel Core Cutting Machine has a water-cooling system which prevents the heating of the cutting stone.
The Manuel Core Cutting motor has an IP 55 protection class, with a power of 3 kW, 4 hp.
It has a long-lasting electric pump with cooler.
The Manuel Core Cutting Machine do not make cutting head oscillating movement.
There is shield apparatus to prevent scattering of particles.
There is a V bedding system on the purpose of to obtain a half cylinder that up to 1200 mm to cut the core. The V bedding system has a specimen rest support and precautions have been taken to prevent the specimen from slipping during cutting of the specimen.
It is painted with electrostatic dye to resistant the scratch.
The Manuel Core Cutting Machine has 4 feets with a height of 90 cm.
It can circulate its own water thanks to the water tank and water pump to be installed on the Concrete Cutting Machine.
The Manuel Concrete Cutting Machine is equipped with three-phase industrial type male plugs with grounded and 3 phase, neutral, earth connection.
Core Cutting Blade diameter is 350 mm for HR-M1250 Model and 300 mm for HR-M1300 Model. Blade speed for both models is 2800 rpm.
The Manuel Concrete Cutting Machine is supplied with the wrench and equipment for removing and installing the Core Cutting Blade.
Cutting Height is 105 mm for HR-M1250 Model and 95 mm for HR-M1300. Cutting Length for both models is 1200 mm.
The Manuel Core Cutting Machine has a water-cooling system which prevents the heating of the cutting stone.
The Manuel Core Cutting motor has an IP 55 protection class, with a power of 3 kW, 4 hp.
It has a long-lasting electric pump with cooler.
The Manuel Core Cutting Machine do not make cutting head oscillating movement.
There is shield apparatus to prevent scattering of particles.
There is a V bedding system on the purpose of to obtain a half cylinder that up to 1200 mm to cut the core. The V bedding system has a specimen rest support and precautions have been taken to prevent the specimen from slipping during cutting of the specimen.
It is painted with electrostatic dye to resistant the scratch.
The Manuel Core Cutting Machine has 4 feets with a height of 90 cm.
It can circulate its own water thanks to the water tank and water pump to be installed on the Concrete Cutting Machine.
The Manuel Concrete Cutting Machine is equipped with three-phase industrial type male plugs with grounded and 3 phase, neutral, earth connection.
Core Cutting Blade diameter is 350 mm for HR-M1250 Model and 300 mm for HR-M1300 Model. Blade speed for both models is 2800 rpm.
The Manuel Concrete Cutting Machine is supplied with the wrench and equipment for removing and installing the Core Cutting Blade.
Share
